进口阀天RD-14H减压阀

点击图片查看原图
单价:面议起订数量:1
品牌:日本VENN阀天可供数量:23
顾客评论:已有 0 条评价销售:累计出售 0 台,0 个订单
关注度:已有 1521 人关注更新:2018-12-11
所在地:上海 市辖区 松江区
 
询价
 
«返回列表
«上一个下一个» 
 
公司基本资料信息
 
 
进口阀天RD-14H减压阀
日本阀天RD-14H减压阀详细描述:
RD-14H valve is suitable for: oil, pressure 1.0Mpa following caliber range: 20-150mm Suitable temperature: 5-90 ℃ Body material: cast iron valves day Japan RD-14H is by adjusting the valve, the inlet pressure is reduced to the outlet pressure of a need, and rely on the energy of the medium itself, so that automatically maintain a stable outlet pressure valve.
RD-14H减压阀适用于:压力1.0Mpa以下的油品,口径范围:20-150mm 适用温度:5-90℃ 阀体材质为:铸铁 日本阀天RD-14H减压阀是通过调节,将进口压力减至某一需要的出口压力,并依靠介质本身的能量,使出口压力自动保持稳定的阀门。
Operation:
1, closed gate valve before the open gate valve after low pressure downstream manufacturing environment;
2, the adjusting screw counterclockwise rotation to the uppermost position (relative to the minimum outlet pressure), and then close the valve after the valve;
3. Slowly open the gate valve to fully open before;
4. Slowly turn adjustment screw clockwise, the pressure is adjusted to the desired outlet pressure (gauge pressure in the valve prevail); adjusted, the lock
Nut, open the valve gate valve;
5, such as export when adjusting the pressure higher than the set pressure, must start from the first step to re-adjust, which can only tune from low to high pressure.
日本阀天RD-14H减压阀操作方式:
1、关闭减压阀前的闸阀,开启减压阀后的闸阀,制造下游低压环境;
2、将调节螺钉按逆时针旋转至最上位置(相对最低出口压力),然后关闭减压阀后闸阀;
3、慢慢开启减压阀前的闸阀至全开;
4、顺时针慢慢旋转调节螺钉,将出口压力调至所需要的压力(以阀后表压为准);调整好后,将锁紧螺母锁紧,打开减压阀后闸阀;
5、如在调整时出口压力高于设定压力,须从第一步开始重新调整,即只能从低压向高压调。

 
更多>请进入我的网站本公司其它产品
 
交易提醒
免责声明:以上所展示的信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责,当今商务网对此不承担任何责任!

友情提醒:为规避购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量!

[ 商品搜索 ] [ ] [ 告诉好友 ] [ 打印本文 ] [ 关闭窗口 ]

 
  当今供应 | 当今采购 | 当今图库 | 当今公司 | 当今展会 |
 
购物车(0)   站内信(0)   新对话(0)